Harman Kardon HS-200 Rev 0 free download

File name HS-200 Rev 0.pdf

ENGLISH HS 200 Home Cinema System SERVICE MANUAL Front Panel Controls ENGLISH 0 Main Information Display 3 USB On-The-Go Input 6 Slot Loader 1 Power On/Off (Standby) 4 Headphone Jack 2 Eject 5 Volume Control 0 Main Information Display: This display 3 USB On-The-Go Input: This input may be 4 Headphone Jack: This jack may be used to delivers messages and status indications to help used to temporarily connect a USB thumb device listen to the system's output through a pair of you operate the HS 200 Controller. or portable hard disk for direct playback of headphones. Be certain that the headphones 1 Power On/Off (Standby): Press the button audio, image of video files or a USB hub. The have a standard 3.5 mm stereo phone plug. once to turn the HS 200 Controller on, press it USB inputs are designed to power a single USB Note that the main room speakers will again to put the unit in the Standby mode. device at a time. If additional hard disks are automatically be turned off when the Note that when the HS 200 Controller is connected through a hub it is necessary that headphone jack is in use. switched on, the Power Indicator around the additional external power supplies are used to 5 Volume Control: Turn this knob clockwise button turns blue. power the hub and hard disks. to increase the volume, counterclockwise to 2 Eject: Press this button to release a disc decrease the volume. If the system is muted, from the loader. adjusting volume control will automatically release the unit from the silenced condition. 6 Slot loader: Gently insert a CD or DVD into this slot, with the printed side of the disc facing up. Note there is no drawer. Press the Eject Button 2 to release the disc. FRONT PANEL CONTROLS 7 Front Panel Display A Disc Type Indicators G Source Indica